How to install granite countertops

Granite is a hard igneous rock that can be cut into different shapes and is a perfect material for making countertops. It is not only beautiful, but also durable and heat resistant. Granite countertops are a luxurious addition to any kitchen or bathroom. They are available in a variety of beautiful and unique designs to choose from.

In the past, it was advised to hire a professional for the installation of a granite countertop. Now many companies offer DIY granite countertop kits that you can install yourself. Here are some steps to installing a granite countertop on your own:

– Once your cabinets are installed and securely anchored to the floor and walls, use craft paper to take the exact measurement for your countertop. It is important to include a one to half inch overhang for the edges that will be facing the cabinets. Granite countertops are available in a variety of styles and colors. You should choose one based on the overall design and style of the kitchen and the color of the cabinets and flooring. Buy a countertop from a local retail store or you can also order one online.

– Cut plywood to fit on top of cabinets to support the weight of the granite. It is important to make sure the plywood is square and level. Then use pilot holes to screw the plywood in place to prevent cracking.

– Granite is a heavy stone and can break if not handled properly. You can get help to lift the counter and place it on top of the cabinet. Make sure the countertop fits snugly into the cabinet.

– After that, remove the granite and create a pilot hole in the cutout of the brand sink with a drill. Use a jigsaw to create a hole for the sink. Install the sink correctly and make sure it fits properly.

– In the next step, level the slab joints. It is important that the seams are absolutely level before gluing. Use screws under the plywood to make adjustments to the height of the granite.

– Apply silicone around the edges of the plywood every 6 to 12 inches. Seal the granite by placing a bead of caulk around the outside edge of the sink and the top of the sink. Fasten the granite slab in place to make sure the joints are well matched.

– Use blue masking tape to tape over the seam. Fill the seams with a tablespoon of polyester-based resin and add a small amount of color. After that, remove the masking tape so that the mixture does not dry on the tape. Once the color dries, smooth the countertop with a joint stone until smooth.

To clean your granite countertop, use only mild cleaners and avoid exposing it to extreme temperatures.